feat(iterm2): add shell integration script (#11509)

plugins/iterm2/README.md

@@ -2,11 +2,20 @@
 
 This plugin adds a few functions that are useful when using [iTerm2](https://www.iterm2.com/).
 
+
 To use it, add _iterm2_ to the plugins array of your zshrc file:
 ```
 plugins=(... iterm2)
 ```
 
+Optionally, the plugin also applies the [Shell Integration Script for iTerm2](https://iterm2.com/documentation-shell-integration.html).
+You can enable the integration with zstyle. It's important to add this line 
+before the line sourcing oh-my-zsh:
+
+```
+zstyle :omz:plugins:iterm2 shell-integration yes
+```
+
 ## Plugin commands
 
 * `_iterm2_command <iterm2-command>`
@@ -24,6 +33,9 @@ plugins=(... iterm2)
 * `iterm2_tab_color_reset`
   resets the color of iTerm2's current tab back to default.
 
+
+For shell integration features see the [official documentation](https://iterm2.com/documentation-shell-integration.html).
+
 ## Contributors
 
 - [Aviv Rosenberg](https://github.com/avivrosenberg)

plugins/iterm2/iterm2.plugin.zsh

@@ -7,6 +7,17 @@
 # This plugin is only relevant if the terminal is iTerm2 on OSX.
 if [[ "$OSTYPE" == darwin* ]] && [[ -n "$ITERM_SESSION_ID" ]] ; then
 
+  # maybe make it the default in the future and allow opting out?
+  if zstyle -t ':omz:plugins:iterm2' shell-integration; then 
+    # Handle $0 according to the standard:
+    # https://zdharma-continuum.github.io/Zsh-100-Commits-Club/Zsh-Plugin-Standard.html
+    0="${${ZERO:-${0:#$ZSH_ARGZERO}}:-${(%):-%N}}"
+    0="${${(M)0:#/*}:-$PWD/$0}"
+
+    # See official docs: https://iterm2.com/documentation-shell-integration.html
+    source "${0:A:h}/iterm2_shell_integration.zsh"
+  fi
+
   ###
   # Executes an arbitrary iTerm2 command via an escape code sequence.
   # See https://iterm2.com/documentation-escape-codes.html for all supported commands.

plugins/iterm2/iterm2_shell_integration.zsh

+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+
+if [[ -o interactive ]]; then
+  if [ "${ITERM_ENABLE_SHELL_INTEGRATION_WITH_TMUX-}""$TERM" != "tmux-256color" -a "${ITERM_ENABLE_SHELL_INTEGRATION_WITH_TMUX-}""$TERM" != "screen" -a "${ITERM_SHELL_INTEGRATION_INSTALLED-}" = "" -a "$TERM" != linux -a "$TERM" != dumb ]; then
+    ITERM_SHELL_INTEGRATION_INSTALLED=Yes
+    ITERM2_SHOULD_DECORATE_PROMPT="1"
+    # Indicates start of command output. Runs just before command executes.
+    iterm2_before_cmd_executes() {
+      if [ "$TERM_PROGRAM" = "iTerm.app" ]; then
+        printf "\033]133;C;\r\007"
+      else
+        printf "\033]133;C;\007"
+      fi
+    }
+
+    iterm2_set_user_var() {
+      printf "\033]1337;SetUserVar=%s=%s\007" "$1" $(printf "%s" "$2" | base64 | tr -d '\n')
+    }
+
+    # Users can write their own version of this method. It should call
+    # iterm2_set_user_var but not produce any other output.
+    # e.g., iterm2_set_user_var currentDirectory $PWD
+    # Accessible in iTerm2 (in a badge now, elsewhere in the future) as
+    # \(user.currentDirectory).
+    whence -v iterm2_print_user_vars > /dev/null 2>&1
+    if [ $? -ne 0 ]; then
+      iterm2_print_user_vars() {
+          true
+      }
+    fi
+
+    iterm2_print_state_data() {
+      local _iterm2_hostname="${iterm2_hostname-}"
+      if [ -z "${iterm2_hostname:-}" ]; then
+        _iterm2_hostname=$(hostname -f 2>/dev/null)
+      fi
+      printf "\033]1337;RemoteHost=%s@%s\007" "$USER" "${_iterm2_hostname-}"
+      printf "\033]1337;CurrentDir=%s\007" "$PWD"
+      iterm2_print_user_vars
+    }
+
+    # Report return code of command; runs after command finishes but before prompt
+    iterm2_after_cmd_executes() {
+      printf "\033]133;D;%s\007" "$STATUS"
+      iterm2_print_state_data
+    }
+
+    # Mark start of prompt
+    iterm2_prompt_mark() {
+      printf "\033]133;A\007"
+    }
+
+    # Mark end of prompt
+    iterm2_prompt_end() {
+      printf "\033]133;B\007"
+    }
+
+    # There are three possible paths in life.
+    #
+    # 1) A command is entered at the prompt and you press return.
+    #    The following steps happen:
+    #    * iterm2_preexec is invoked
+    #      * PS1 is set to ITERM2_PRECMD_PS1
+    #      * ITERM2_SHOULD_DECORATE_PROMPT is set to 1
+    #    * The command executes (possibly reading or modifying PS1)
+    #    * iterm2_precmd is invoked
+    #      * ITERM2_PRECMD_PS1 is set to PS1 (as modified by command execution)
+    #      * PS1 gets our escape sequences added to it
+    #    * zsh displays your prompt
+    #    * You start entering a command
+    #
+    # 2) You press ^C while entering a command at the prompt.
+    #    The following steps happen:
+    #    * (iterm2_preexec is NOT invoked)
+    #    * iterm2_precmd is invoked
+    #      * iterm2_before_cmd_executes is called since we detected that iterm2_preexec was not run
+    #      * (ITERM2_PRECMD_PS1 and PS1 are not messed with, since PS1 already has our escape
+    #        sequences and ITERM2_PRECMD_PS1 already has PS1's original value)
+    #    * zsh displays your prompt
+    #    * You start entering a command
+    #
+    # 3) A new shell is born.
+    #    * PS1 has some initial value, either zsh's default or a value set before this script is sourced.
+    #    * iterm2_precmd is invoked
+    #      * ITERM2_SHOULD_DECORATE_PROMPT is initialized to 1
+    #      * ITERM2_PRECMD_PS1 is set to the initial value of PS1
+    #      * PS1 gets our escape sequences added to it
+    #    * Your prompt is shown and you may begin entering a command.
+    #
+    # Invariants:
+    # * ITERM2_SHOULD_DECORATE_PROMPT is 1 during and just after command execution, and "" while the prompt is
+    #   shown and until you enter a command and press return.
+    # * PS1 does not have our escape sequences during command execution
+    # * After the command executes but before a new one begins, PS1 has escape sequences and
+    #   ITERM2_PRECMD_PS1 has PS1's original value.
+    iterm2_decorate_prompt() {
+      # This should be a raw PS1 without iTerm2's stuff. It could be changed during command
+      # execution.
+      ITERM2_PRECMD_PS1="$PS1"
+      ITERM2_SHOULD_DECORATE_PROMPT=""
+
+      # Add our escape sequences just before the prompt is shown.
+      # Use ITERM2_SQUELCH_MARK for people who can't mdoify PS1 directly, like powerlevel9k users.
+      # This is gross but I had a heck of a time writing a correct if statetment for zsh 5.0.2.
+      local PREFIX=""
+      if [[ $PS1 == *"$(iterm2_prompt_mark)"* ]]; then
+        PREFIX=""
+      elif [[ "${ITERM2_SQUELCH_MARK-}" != "" ]]; then
+        PREFIX=""
+      else
+        PREFIX="%{$(iterm2_prompt_mark)%}"
+      fi
+      PS1="$PREFIX$PS1%{$(iterm2_prompt_end)%}"
+      ITERM2_DECORATED_PS1="$PS1"
+    }
+
+    iterm2_precmd() {
+      local STATUS="$?"
+      if [ -z "${ITERM2_SHOULD_DECORATE_PROMPT-}" ]; then
+        # You pressed ^C while entering a command (iterm2_preexec did not run)
+        iterm2_before_cmd_executes
+        if [ "$PS1" != "${ITERM2_DECORATED_PS1-}" ]; then
+          # PS1 changed, perhaps in another precmd. See issue 9938.
+          ITERM2_SHOULD_DECORATE_PROMPT="1"
+        fi
+      fi
+
+      iterm2_after_cmd_executes "$STATUS"
+
+      if [ -n "$ITERM2_SHOULD_DECORATE_PROMPT" ]; then
+        iterm2_decorate_prompt
+      fi
+    }
+
+    # This is not run if you press ^C while entering a command.
+    iterm2_preexec() {
+      # Set PS1 back to its raw value prior to executing the command.
+      PS1="$ITERM2_PRECMD_PS1"
+      ITERM2_SHOULD_DECORATE_PROMPT="1"
+      iterm2_before_cmd_executes
+    }
+
+    # If hostname -f is slow on your system set iterm2_hostname prior to
+    # sourcing this script. We know it is fast on macOS so we don't cache
+    # it. That lets us handle the hostname changing like when you attach
+    # to a VPN.
+    if [ -z "${iterm2_hostname-}" ]; then
+      if [ "$(uname)" != "Darwin" ]; then
+        iterm2_hostname=`hostname -f 2>/dev/null`
+        # Some flavors of BSD (i.e. NetBSD and OpenBSD) don't have the -f option.
+        if [ $? -ne 0 ]; then
+          iterm2_hostname=`hostname`
+        fi
+      fi
+    fi
+
+    [[ -z ${precmd_functions-} ]] && precmd_functions=()
+    precmd_functions=($precmd_functions iterm2_precmd)
+
+    [[ -z ${preexec_functions-} ]] && preexec_functions=()
+    preexec_functions=($preexec_functions iterm2_preexec)
+
+    iterm2_print_state_data
+    printf "\033]1337;ShellIntegrationVersion=14;shell=zsh\007"
+  fi
+fi

plugins/iterm2/update

+#!/bin/sh
+
+curl -s -L https://iterm2.com/shell_integration/zsh \
+  -o iterm2_shell_integration.zsh